Produk
h6 Batang tungsten karbida tanah gred K10
pengenalan produk
Rod karbida bersimen boleh digunakan untuk membuat kilang akhir, pelbagai mata gerudi, pemotong khas kereta, pemotong khas enjin, horologi, pemprosesan pemotong khas, pemotong pengilangan menegak integral, graver dan lain-lain. Juga, rod tungsten karbida boleh dibuat menjadi aloi keras pukulan, mandrel, pusat, dan alat penebuk.
Ciri-ciri Produk
1. Rintangan haus yang baik, keliatan yang lebih tinggi, ketepatan yang tinggi, ubah bentuk yang lebih baik dan rintangan patah
2. Peralatan penyemperitan automatik lanjutan untuk menghasilkan
3. HIP pensinteran dan pengisaran ketepatan untuk memastikan mempunyai prestasi yang baik
4. Kedua-dua keadaan kosong dan siap tersedia
5. Boleh mencapai permukaan kesan cermin selepas pengisaran dan penggilap yang tepat
Maklumat produk
Saiz yang Dirujuk
| Batang Karbida Pepejal (Panjang penuh) | |||||
| Nominal Dia | D(mm) | D(mm) | Panjang | Kenyataan | |
| D (mm) | Un-ground | h6 | mm | ||
| 0.5 | 0.7 | 0.5 | 310-330 | ||
| 0.8 | 1 | 0.8 | 310-330 | ||
| 1 | 1.2 | 1 | 310-330 | ||
| 1.5 | 1.7 | 1.5 | 310-330 | ||
| 1/16" | 1.5875 | 1.8 | 1.5875 | 12" -13" | saiz inci |
| 2 | 2.2 | 2 | 310-330 | ||
| 2.35 | 2.55 | 2.35 | 310-330 | ||
| 3/32" | 2.38 | 2.6 | 2.38 | 12" -13" | saiz inci |
| 2.5 | 2.7 | 2.5 | 310-330 | ||
| 3 | 3.2 | 3 | 310-330 | ||
| 1/8" | 3.175 | 3.4 | 3.175 | 12" -13" | saiz inci |
| 3.5 | 3.7 | 3.5 | 310-330 | ||
| 32/5 | 3.968 | 4.2 | 3.968 | 12" -13" | saiz inci |
| 4 | 4.2 | 4 | 310-330 | ||
| 4.5 | 4.5 | 310-330 | |||
| 3/16" | 4.7625 | 5 | 4.762 | 12" -13" | saiz inci |
| 5 | 5.2 | 5 | 310-330 | ||
| 5.5 | 5.7 | 5.5 | 310-330 | ||
| 6 | 6.2 | 6 | 310-330 | ||
| 1/4" | 6.35 | 6.6 | 6.35 | 12" -13" | saiz inci |
| 6.5 | 6.7 | 6.5 | 310-330 | ||
| 7 | 7.2 | 7 | 310-330 | ||
| 7.5 | 7.7 | 7.5 | 310-330 | ||
| 5/16" | 7.937 | 8.2 | 7.937 | 12" -13" | saiz inci |
| 8 | 8.2 | 8 | 310-330 | ||
| 8.5 | 8.7 | 8.5 | 310-330 | ||
| 9 | 9.2 | 9 | 310-330 | ||
| 9.5 | 9.7 | 9.5 | 310-330 | ||
| 3/8" | 9.525 | 9.7 | 9.525 | 12" -13" | saiz inci |
| 10 | 10.2 | 10 | 310-330 | ||
| 10.5 | 10.7 | 10.5 | 310-330 | ||
| 11 | 11.2 | 11 | 310-330 | ||
| 7/16" | 11.11 | 11.3 | 11.11 | 12" -13" | saiz inci |
| 11.5 | 11.7 | 11.5 | 310-330 | ||
| 12 | 12.2 | 12 | 310-330 | ||
| 12.5 | 12.7 | 12.5 | 310-330 | ||
| 1/2" | 12.7 | 12.9 | 12.7 | 12" -13" | saiz inci |
| 13 | 13.2 | 13 | 310-330 | ||
| 13.5 | 13.7 | 13.5 | 310-330 | ||
| 14 | 14.2 | 14 | 310-330 | ||
| 9/16" | 14.288 | 14.5 | 14.288 | 12" -13" | saiz inci |
| 14.5 | 14.7 | 14.5 | 310-330 | ||
| 15 | 15.2 | 15 | 310-330 | ||
| 15.5 | 15.7 | 15.5 | 310-330 | ||
| 5/8" | 15.875 | 16.1 | 15.875 | 12" -13" | saiz inci |
| 16 | 16.2 | 16 | 310-330 | ||
| 16.5 | 16.7 | 16.5 | 310-330 | ||
| 17 | 17.2 | 17 | 310-330 | ||
| 17.5 | 17.7 | 17.5 | 310-330 | ||
| 18 | 18.2 | 18 | 310-330 | ||
| 18.5 | 18.7 | 18.5 | 310-330 | ||
| 19 | 19.2 | 19 | 310-330 | ||
| 3/4" | 19.05 | 19.3 | 19.05 | 12" -13" | saiz inci |
| 19.5 | 19.7 | 19.5 | 310-330 | ||
| 20 | 20.2 | 20 | 310-330 | ||
| 20.5 | 20.7 | 20.5 | 310-330 | ||
| 21 | 21.2 | 21 | 310-330 | ||
| 21.5 | 21.7 | 21.5 | 310-330 | ||
| 22 | 22.2 | 22 | 310-330 | ||
| 22.5 | 22.7 | 22.5 | 310-330 | ||
| 23 | 23.2 | 23 | 310-330 | ||
| 23.5 | 23.7 | 23.5 | 310-330 | ||
| 24 | 24.2 | 24 | 310-330 | ||
| 24.5 | 24.7 | 24.5 | 310-330 | ||
| 25 | 25.2 | 25 | 310-330 | ||
| 1" | 25.4 | 25.7 | 25.4 | 12" -13" | saiz inci |
| 26 | 26.3 | 26 | 310-330 | ||
| 27 | 27.2 | 27 | 310-330 | ||
| 28 | 28.2 | 28 | 310-331 | ||
| 29 | 29.2 | 29 | 310-333 | ||
| 30 | 30.2 | 30 | 310-334 | ||
| 31 | 31.2 | 31 | 310-335 | ||
| 1-1/4" | 31.75 | 32 | 31.75 | 12" -13" | saiz inci |
| 32 | 32.2 | 32 | 310-336 | ||
| 33 | 33.2 | 33 | 310-337 | ||
| 34 | 34.2 | 34 | 310-338 | ||
| 35 | 35.2 | 35 | 310-339 | ||
| 36 | 36.2 | 36 | 310-340 | ||
| 37 | 37.2 | 37 | 310-341 | ||
| 38 | 38.2 | 38 | 310-342 | ||
| 1-1/2" | 38.1 | 38.4 | 38.1 | 12" -13" | saiz inci |
| 39 | 39.2 | 39 | 310-343 | ||
| 40 | 40.2 | 40 | 310-344 | ||
| 42 | 42.2 | 42 | 310-344 | ||
Senarai Gred
| Gred Pengenalan kepada Rod Karbida | |||||||
| Gred | Co % | Saiz butiran WC | HRA | HV | Ketumpatan (g/cm³） | Kekuatan lentur (MPa) | Keliatan patah（MNm-3/2) |
| KT10F | 6 | Submikron | 92.9 | 1840 | 14.8 | 3800 | 10 |
| KT10UF | 6 | superfine | 93.8 | 2040 | 14.7 | 3200 | 9 |
| KT10NF | 6 | nanometer | 94.5 | 2180 | 14.6 | 4000 | 9 |
| KT10C | 7 | baiklah | 90.7 | 1480 | 14.7 | 3800 | 12 |
| KT11F | 8 | Submikron | 92.3 | 1720 | 14.6 | 4100 | 10 |
| KT11UF | 8 | superfine | 93.5 | 1960 | 14.5 | 3000 | 9 |
| KT12F | 9 | superfine | 93.5 | 1960 | 14.4 | 4500 | 10 |
| KT12NF | 9 | nanometer | 94.2 | 2100 | 14.3 | 4800 | 9 |
| KT15D | 9 | Submikron | 91.2 | 1520 | 14.4 | 4000 | 13 |
| KT15F | 10 | Submikron | 92.0 | 1670 | 14.3 | 4000 | 11 |
| KT20F | 10 | Submikron | 91.7 | 1620 | 14.4 | 4300 | 11 |
| KT20D | 10 | Submikron | 92.0 | 1670 | 14.3 | 4500 | 11 |
| KT25F | 12 | superfine | 92.4 | 1740 | 14.1 | 5100 | 10 |
| KT25EF | 12 | superfine | 92.2 | 1700 | 14.1 | 4800 | 10 |
| KT25D | 12 | superfine | 91.5 | 1570 | 14.2 | 4200 | 13 |
| KT37NF | 15 | nanometer | 92.0 | 1670 | 13.8 | 4800 | 10 |
Tulis mesej anda di sini dan hantar kepada kami
